Refrigerating Specialties Solenoid Valve Type S9W

These heavy duty, cast steel bodied (ASTM No. A352 Grade LCB), spring closing solenoid valves weld directly in the line and do not require flanges. They are for control of Ammonia R-12 R-22 and R-502 other common refrigerants, certain oils and other fluids approved for use in refrigeration valves. The type S9W also are pilot operated valves but use an external source of higher pressure gas to operate the valve, and, therefore require no minimum pressure drop to open. The external gas pressure for the Type S9W must be at least 0.71 bar (10 psi) above valve internal upstream pressure for positive opening. This valve type is normally closed.

For personal assistance on RS products contact RCC.

 Product Spotlight

R/S
	Check/Isolation
	Hand Valves
	Liquid Level Control
	Pressure Regulator
	Safety Relief
	Solenoid Valves
	Strainers
	Rapid Purgers
Flo Con  Sporlan  HERL